 |
|
产品详细介绍Brocade FastIron CX系列 以太网中低端交换机
Brocade FastIron CX系列是高性能、可扩展而且灵活的企业园区接入交换机，可以在紧凑的机型中实现下一代融合应用。FastIron CX系列交换机有24端口和48端口两种型号，支持PoE和PoE+，可以大大提高网络边缘的性能和智能水平。
功能强大、可扩展而且灵活的园区网接入解决方案
Brocade FastIron CX系列交换机可以提供当今企业园区网所需的更高性能、可扩展性和灵活性。利用多种先进的功能，这些交换机可以在灵活的1U机型中向网络边缘提供高性能和智能，帮助降低基础架构和管理成本。
FastIron CX交换机是专为提供线速无阻塞性能而设计的，有24端口和48端口两种型号，和PoE（以太网供电）及非PoE两种版本。利用内置的16 Gbps堆栈端口和Brocade IronStack技术，企业可以将最多8台交换机堆叠为一台有384个端口的逻辑交换机。PoE型号支持新的Power over Ethernet Plus（PoE+）标准，为边缘设备提供30瓦的电源，支持下一代园区应用。
其它主要特性包括：
• 业界第一款Power over Ethernet Plus（PoE+）交换机，带有堆栈功能和冗余电源
• 高可用性模块化设计，带可热插拔冗余电源和可拆卸式风扇
• 可选的万兆以太网（10 GbE）端口，可建立从可堆栈解决方案到聚合/核心层的高速连接
• 基于硬件的sFlow流监控功能，由Brocade IronShield 360提供实时保护，防止基于网络和主机的攻击
• Brocade IronView Network Manager（3.2或更高版）、基于Web的网元管理和丰富的命令行工具提供简化、全面的管理
下一代园区融合
FastIron CX交换机可以通过网络连接同时提供电源和数据传输功能，从而为园区边缘设备提供了一种单线缆解决方案，这些设备包括Voice over IP（VoIP）电话、传统IP电话、监控摄像头和无线接入点。
这些交换机可支持新的PoE Plus标准（802.3at），为每台设备提供30瓦的电源。这种强大的解决方案可以简化下一代解决方案的布线，如视频会议电话、水平/垂直转动摄像头和802.11n无线接入点。
24端口的FastIron CX交换机可以为每个端口提供Class 3（15.4瓦）或PoE+（30瓦）电源，而48端口型号可以为每个端口提供Class 3电源或向26个端口提供PoE+电源。这些交换机可以同时为PoE和PoE+设备供电而不超出交换机820瓦特的功率预算。
供电设备的即插即用式运行
FastIron CX交换机可以支持IEEE 802.1AB Link Layer Discovery Protocol（LLDP）和ANSI TIA 1057 Link Layer Discovery Protocol-Media Endpoint Discovery（LLDP-MED）标准，可以帮助企业部署可互操作的多厂商解决方案，实现统一通信。
LLDP和LLDP-MED为配置、发现和管理网络架构提供了一种标准、开放的方法。这两种协议可实现网络运行的简化和自动化，进而帮助降低运营成本。
简化的高性能堆栈
FastIron CX交换机带有两个专用的16 Gbps堆栈端口，可提供简单而强大的扩展功能，满足网络边缘的未来增长需求。利用IronStack技术，最多可将8台FastIron CX交换机堆栈成一个只有一个IP地址的逻辑交换机，以简化管理。
整个堆栈可以提供64 Gbps的交换带宽，因此基本上可避免交换机间瓶颈。专用的堆栈端口可在机架内提供可扩展性，这样就可以将可选的10 GbE端口解放出来，用于建立到聚合或核心层的高速连接。
来自堆栈内不同成员的10 GbE端口可以合并起来，以优化性能和可用性。为了进一步提高灵活性，IronStack还支持使用10 GbE端口，通过光缆布线在机架间、楼层间和大楼内实现交换机堆栈。
一个堆栈中最多可以集中8条10 GbE链路，从而在布线室和聚合层之间提供80 Gbps的总带宽。
更低的功耗
在当今快速增长的业务环境中，企业需要最大限度地降低整个IT基础架构的功耗。FastIron CX交换机可以智能地控制电源使用，将“绿色”计划扩展到布线室。
提供给园区设备的电源可以自动协商，提供正好能满足设备需求的电源。如果设备进入睡眠模式，它们的功耗会更低，需要网络提供的电源更少，因此可以最大限度地降低园区环境中的功耗。
高可用性和企业级安全性
FastIron CX交换机通常专用于数据中心级解决方案，可以选配可热插拔、负载分担的冗余双电源。它的�？榛杓苹勾锌刹鹦兜姆缟茸榧�。这些特性使它能够以更小的占地面积为园区布线室提供更高的可用性。
其他设计特性包括进风口和出风口温度传感器和风扇转速检测，可帮助迅速检测到异常运行条件或故障，进而帮助最大限度地缩短平均修复时间。
此外，FastIron CX交换机还采用了Brocade IronWare操作系统，可以为第2层和第3层业务提供丰富的安全功能，实现网络接入控制（NAC）和拒绝服务（DoS）攻击防护。
基于开放标准的简单、安全管理
FastIron CX交换机可以提供基于标准的简便管理功能，帮助企业节约管理时间，减轻工作量，同时有效地保护自己的网络。主要功能包括：
• 通过自动配置实现的更简便部署
• 通过Brocade IronView Network Manager实现轻松管理
• 通过符合行业标准的命令行界面（CLI）实现的开放管理
• 带外管理
以太网存储流量的理想选择
当代的iSCSI SAN环境需要高性能网络来可靠地将存储的数据块发送到服务器上。FastIron CX交换机可以提供强大的功能来支持使多条万兆以太网链路都疲于应付的服务器。
Brocade FastIron CX Series Feature Comparison
FastIron CX 624S FastIron CX 648S FastIron CX 624S-HPOE FastIron CX 648S-HPOE
Switching bandwidth (data rate) 152 Gbps 200 Gbps 152 Gbps 200 Gbps
Forwarding bandwidth (data rate) 114 Mpps 150 Mpps 114 Mpps 150 Mpps
Stacking bandwidth (data rate, full duplex) 64 Gbps 64 Gbps 64 Gbps 64 Gbps
10/100/1000 Mbps RJ-45 ports 20 44 20 44
10/100/1000 Mbps combination ports 4 4 4 4
10 Gigabit Ethernet XFP/CX4 ports 2 (optional) 2 (optional) 2 (optional) 2 (optional)
16 Gbps CX4 stacking ports 2 2 2 2
Maximum PoE Class 3 ports n/a n/a 24 48
Maximum PoE+ ports n/a n/a 24 26
Power supplies 2 removable (second optional) 2 removable (second optional) 2 removable (second optional) 2 removable (second optional)
Optional FRUs
10 Gigabit Ethernet module FCX-2XG FCX-2XG FCX-2XG FCX-2XG
Second power supply RPS13 RPS13 RPS14 RPS14
Replacement fan unit FCX-S-FAN FCX-S-FAN FCX-S-POE-FAN FCX-S-POE-FAN
System Architecture
Connector options 10/100/1000 ports: RJ-45 (fixed)
1 Gbps SFP combo ports: SX, LX, LHA, LHB, 1000Base-BX, CWDM
10 Gbps XFP ports: CX4, 1310-MM, SR, LR, ER, ZR, ZRD
Stacking ports: fixed CX4 (fixed)
Out-of-band Ethernet management: RJ-45 (fixed)
Console management: DB9
Maximum MAC addresses 32,000
Maximum VLANs 4096
Maximum STP (spanning trees) 255
Maximum routes (in hardware) 16,000
Trunking Maximum ports per trunk: 8
Maximum trunk groups: 32
Maximum Jumbo Frame size 9000 bytes
IEEE standards compliance • 802.1AB LLDP/LLDP-MED
• 802.1D-2004 MAC Bridging
• 802.1p Mapping to Priority Queue
• 802.1s Multiple Spanning Tree
• 802.1w Rapid Spanning Tree
• 802.1x Port-based Network Access Control
• 802.3 10 Base-T
• 802.3ab 1000 Base-T
• 802.3ad Link Aggregation (Dynamic and Static)
• 802.3ae 10 Gigabit Ethernet
• 802.3af Power over Ethernet
• 802.3ak CX4
• 802.3u 100 Base-TX
• 802.3x Flow Control
• 802.3z 1000Base-SX/LX
• 802.3 MAU MIB (RFC 2239)
Layer 2 switching • 802.1s Multiple Spanning Tree
• 802.1x Authentication
• Auto MDI/MDIX
• BPDU Guard, Root Guard
• Dual-Mode VLANs
• Dynamic VLAN Assignment
• Dynamic Voice VLAN Assignment
• Fast Port Span
• Flexible Static Multicast MAC Address Configuration
• GARP VLAN Registration Protocol
• IGMP Snooping (v1/v2/v3)
• Link Fault Signaling (LFS)
• MAC Address Locking
• MAC-Layer Filtering
• MAC Learning Disable; Port Security
• MLD Snooping (v1/v2)
• Multi-device Authentication
• Per VLAN Spanning Tree (PVST/PVST+/PVRST)
• PIM–SM Snooping
• Policy-controlled MAC-based VLANs
• Port-based Access Control Lists
• Port-based, ACL-based, MAC Filter-based, and VLAN-based Mirroring
• Port Loop Detection
• Port Speed Downshift and Selective Auto-negotiation
• Private VLAN
• Private VLANs and Uplink Switch
• Protected Link Groups
• Protocol VLAN (802.1v), Subnet VLAN
• Remote Fault Notification (RFN)
• Single-instance Spanning Tree
• Single-link LACP
• Trunk Groups
• Trunk Threshold
• Uni-Directional Link Detection (UDLD)
Base Layer 3 routing • ECMP
• IPv4 Static Routes
• L3/L4 ACLs RIP v1/v2 announce
• Routed Interfaces
• Routing Between Directly Connected Subnets
• Virtual Interfaces
• Virtual Route Redundancy Protocol (VRRP)
Premium Layer 3 routing • BGP
• Host routes
• Multicast routing
• OSPF v2
• PIM-SM, PIM-SSM, PIM-DM
• RIP v1, v2
• Route-only Support
Metro features • Metro-Ring Protocol (v1, v2)
• Virtual Switch Redundancy Protocol (VSRP)
• VLAN Stacking (Q-in-Q)
• VRRP
• Topology Groups
Quality of service • ACL Mapping and Marking of ToS/DSCP
• ACL Mapping to Priority Queue
• ACL Mapping to ToS/DSCP
• Classifying and Limiting Flows Based on TCP Flags
• DHCP Relay
• DiffServ Support
• Honoring DSCP and 802.1p
• MAC Address Mapping to Priority Queue
• QoS Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP
Traffic management • ACL-based inbound rate limiting and traffic policies
• Broadcast, multicast, and unknown unicast rate limiting
• Inbound rate limiting per port
• Outbound rate limiting per port and per queue
Management
Management and control • Auto Configuration
• Configuration Logging
• Digital Optical Monitoring
• Display Log Messages on Multiple Terminals
• Embedded Web Management
• Foundry Discovery Protocol (FDP)
• Industry-Standard Command Line Interface (CLI)
• Integration with HP OpenView for Sun Solaris, HP-UX, IBM AIX, and Windows
• IronView Network Manager (INM) Version 3.2 or later
• MIB Support for MRP, Port Security, MAC Authentication, and MAC-based VLANs
• Out-of-band Ethernet Management
• RFC 783 TFTP
• RFC 854 TELNET Client and Server
• RFC 1157 SNMPv1/v2c
• RFC 1213 MIB-II
• RFC 1493 Bridge MIB
• RFC 1516 Repeater MIB
• RFC 1573 SNMP MIB II
• RFC 1643 Ethernet Interface MIB
• RFC 1643 Ethernet MIB
• RFC 1724 RIP v1/v2 MIB
• RFC 1757 RMON MIB
• RFC 2068 Embedded HTTP
• RFC 2131 DHCP Relay
• RFC 2570 SNMPv3 Intro to Framework
• RFC 2571 Architecture for Describing SNMP Framework
• RFC 2572 SNMP Message Processing and Dispatching
• RFC 2573 SNMPv3 Applications
• RFC 2574 SNMPv3 User-based Security Model
• RFC 2575 SNMP View-based Access Control Model SNMP
• RFC 2818 Embedded HTTPS
• RFC 3176 sFlow
• SNTP Simple Network Time Protocol
• Support for Multiple Syslog Servers
Embedded security • Bi-level Access Mode (Standard and EXEC Level)
• EAP pass-through support
• IEEE 802.1X username export in sFlow
• Protection against Denial of Service (DOS) attacks
Secure management • Authentication, Authorization, and Accounting (AAA)
• Advanced Encryption Standard (AES) with SSHv2
• RADIUS/TACACS/TACACS+
• Secure Copy (SCP)
• Secure Shell (SSHv2)
• Username/Password
Mechanical
Enclosure Side-to-back airflow; 1U, 19-inch EIA-compliant, power from non-port side
Size FastIron CX 624S and 648S models:
Width: 44.0 cm (17.3 in)
Height: 4.4 cm (1.7 in)
Depth: 38.6 cm (15.2 in)
FastIron CX 624S-HPOE and 648S-HPOE models:
Width: 44.0 cm (17.3 in)
Height: 4.4 cm (1.7 in)
Depth: 44.0 cm (17.3 in)
Weight FastIron CX 624S and 648S models: 4.0 kg (8.8 lbs)
FastIron CX 624S-HPOE and 648S-HPOE models: 4.5 kg (9.9 lbs)
Environment
Temperature Operating temperature: 32° to 104°F (0° to 40°C)
Storage temperature: -23° to 158°F (-25° to 70°C)
Humidity Relative humidity: 5% to 95%, non-condensing
Altitude Storage altitude: 10,000 ft (3000 m) maximum
Acoustic 51 dB to 63 dB
Power
Power supplies Up to two internal, redundant, field-replaceable, load-sharing AC power supplies
Power inlet C13
Input voltage Typ. 100-240 VAC
Input line frequency 50-60 Hz
Certification
Electromagnetic emissions FCC Class A (Part 15); EN 55022/CISPR-22 Class A; VCCI Class A
Environmental regulatory compliance RoHS Compliant (6 of 6); WEEE compliant
Power and Thermal Specifications
Max Current at 100 VAC (Amps) Max Current at 200 VAC (Amps) Max Total Power Draw1 (Watts) Max System Power Draw2 (Watts) Max Thermal Output3 (BTU/Hr) Energy Efficiency (Watts/Gbps)
FastIron CX 624S 1.09 0.51 93.6 93.6 319 1.23
FastIron CX 648S 1.39 0.63 122 122 416 1.22
FastIron CX 624S-HPOE4 1.09 0.58 509 107 365 1.41
FastIron CX 648S-HPOE4 1.72 0.94 970 167 570 1.67
1 - Total power drawn from the source and consumed by the switch and attached PoE devices. Class 3 devices assumed on all ports.
2 - Power drawn from the source and consumed only by the switch.
3 - Thermal output of the switch.
4 - With two power supplies installed.
Brocade FastIron CX Models
• FCX624S: 24 10/100/1000 Mbps ports, two 16 GbE stacking ports, one power supply, and advanced Layer 2 switching and enterprise Layer 3 features
• FCX648S: 48 10/100/1000 Mbps ports, two 16 GbE stacking ports, one power supply, and advanced Layer 2 switching and enterprise Layer 3 features
• FCX624S-HPOE: 24 10/100/1000 Mbps PoE+ ports, two 16 GbE stacking ports, one power supply, and advanced Layer 2 switching and enterprise Layer 3 features
• FCX648S-HPOE: 48 10/100/1000 Mbps PoE+ ports, two 16 GbE stacking ports, one power supply, and advanced Layer 2 switching and enterprise Layer 3 features
FastIron CX Options
• FCX-2XG: 2-port 10 Gigabit Ethernet XFP module; supports all FastIron CX models
• RPS13: Second hot-swappable, redundant power supply for non-PoE models
• RPS14: Second hot-swappable, redundant power supply for PoE models
• FCX-S-FAN: Replacement fan unit for non-PoE models
• FCX-S-POE-FAN: Replacement fan unit for PoE models
|
|
| 会员级别：免费会员 |
| 加入时间：2011-06-13
|
|
|
在线客服
与企业联系时请告知该信息来自教育装备网！
